Nitrogen-doped graphene as an excellent candidate for selective gas sensing

The toxic gases,such as CO and NO,are highly dangerous to human health and even cause the death of person and animals in a tiny amount.Therefore,it is very necessary to develop the toxic gas sensors that can instantly monitor these gases.In this work,we have used the first-principles calculations to investigate adsorption of gases on defective graphene nanosheets to seek a suitable material for CO sensing.Result indicates that the vancancy graphene can not selectivly sense CO from air,because O2 in air would disturb the sensing signals of graphene for CO,while the nitrogen-doped graphene is an excellent candidate for selectivly sensing CO from air,because only CO can be chemisorbed on the pyridinic-like N-doped graphene accompanying with a large charge transfer,which can serve as a useful electronic signal for CO sensing.Even in the environment with NO,the N-doped graphene can also detect CO selectively.Therefore,the N-doped graphene is an excellent material for selectively sensing CO,which provides useful information for the design and fabrication of the CO sensors.     

Lipid profiling of mammalian cells with in situ matrix-assisted laser desorption ionization-mass spectrometry

The analysis of cellular lipids and phospholipids has been of continuously increasing research interest due to the importance of these molecules in psychological process. In this work, a mass spectrometry-based method for direct, in situ analysis of lipids in cells was reported. Mammalian cells were directly cultured on ITO-coated glass and then analyzed by matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS). The matrix application process was achieved by electrospray coating, which produced a homogenous layer of matrix crystal on the sample. The detection results and reproducibility are satisfactory. With this method, a profile of abundant membrane lipids is generated, which is characteristic of cell type. In conclusion, this in situ MALDI-MS cellular lipid analysis method provides a platform for sensitive and robust molecular profiling of mammalian cells.     

Thermo-responsive gelatin-functionalized PCL film surfaces for improvement of cell adhesion and intelligent recovery of gene-transfected cells

Efficient local gene transfection on a tissue scaffold is dependent on good cell-adhesion characteristics. In this work, the thermo-responsive gelatin-functionalized polycaprolactone (PCL) films were proposed for improvement of cell adhesion and intelligent recovery of gene-transfected cells. Functional copolymer brushes (PCL-g-P(NIPAAm-co-MAAS)) were first prepared via surface-initiated ATRP of N-isopropylacrylamide (NIPAAm) and methacrylic acid sodium salt (MAAS) from the initiator-funcationalized PCL surfaces. The pendant carboxyl end-groups of the PCL-g-P(NIPAAm-co-MAAS) surface were subsequently coupled with gelatin via carbodiimide chemistry to produce the thermo-responsive gelatin-functionalized PCL surface. The thermo-responsive gelatin-functionalized PCL film surface can improve cell adhesion and proliferation above the LCST of P(NIPAAm) without destroying cell detachment properties at lower temperatures. The dense transfected cells can be recovered simply by lowering culture temperature. The thermo-responsive gelatin-functionalized PCL films are potentially useful as intelligent adhesion modifiers for directing cellular functions within tissue scaffolds.     

New Entangled Coordination Networks Based on Charge‐Tunable Keggin‐Type Polyoxometalates

Investigation into a hydrothermal reaction system with transition‐metal (TM) ions, 1,4‐bis(1,2,4‐triazol‐1‐lmethyl)benzene (BBTZ) and various charge‐tunable Keggin‐type polyoxometalates (POMs) led to the preparation of four new entangled coordination networks, [Co^II(HBBTZ)(BBTZ)_2.5][PMo₁₂O₄₀] ( 1 ), [Cu^I(BBTZ)]₅[BW₁₂O₄₀] ? H₂O ( 2 ), [Cu^II(BBTZ)]₃[AsW^V₃W^VI₉O₄₀] ? 10 H₂O ( 3 ), and [Cu^II₅(BBTZ)₇(H₂O)₆][P₂W₂₂Cu₂O₇₇(OH)₂] ? 6 H₂O ( 4 ). All compounds were characterized by using elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction, and single‐crystal X‐ray diffraction. The mixed valence of W centers in compound 3 was further confirmed by using XPS spectroscopy and bond‐valence sum calculations. In the structural analysis, the entangled networks of 1 – 4 demonstrate zipper‐closing packing, 3D polythreading, 3D polycatenation, and 3D self‐penetration, respectively. Moreover, with the enhancement of POM negative charges and the use of different TM types, the number of nodes in the coordination networks of 1 – 4 increased and the basic metal–organic building motifs changed from a 1D zipper‐type chain (in 1 ) to a 2D pseudorotaxane layer (in 2 ) to a 3D diamond‐like framework (in 3 ) and finally to a 3D self‐penetrating framework (in 4 ). The photocatalytic properties of compounds 1 – 4 for the degradation of methylene blue under UV light were also investigated; all compounds showed good catalytic activity and the photocatalytic activity order of Keggin‐type species was initially found to be {XMo₁₂O₄₀}>{XW₁₂O₄₀}>{XW_12?nTM_nO₄₀}.     

Copper‐Catalyzed NH Insertion and Oxidative Aromatization Cascade: Facile Synthesis of 2‐Arylaminophenols

A copper‐catalyzed cascade reaction of N‐H insertion and oxidative aromatization has been developed. 2‐Arylaminophenols have been prepared in moderate to high yields from the diazo substrates. Moreover, this newly established methodology allows efficient access to natural 1‐oxygenated carbazole alkaloids, such as glycozolicine and murrayafoline A.     

Self‐Assembly of Five 8‐Hydroxyquinolinate‐Based Complexes: Tunable Core,Supramolecular Structure,and Photoluminescence Properties

Five new Zn^II complexes, namely [Zn₃(L)₆] ( 1 ), [Zn₂(Cl)₂(L)₂(py)₂] ( 2 ), [Zn₂(Br)₂(L)₂(py)₂] ( 3 ), [Zn(L)₂(py)] ( 4 ), and [Zn₂(OAc)₂(L)₂(py)₂] ( 5 ), were prepared by the solvothermal reaction of ZnX₂ (X^?=Cl^?, Br^?, F^?, and OAc^?) salts with a 8‐hydroxyquinolinate ligand (HL) that contained a trifluorophenyl group. All of the complexes were characterized by elemental analysis, IR spectroscopy, and powder and single‐crystal X‐ray crystallography. The building blocks exhibited unprecedented structural diversification and their self‐assembly afforded one mononuclear, three binuclear, and one trinuclear Zn^II structures in response to different anions and solvent systems. Complexes 1 – 5 featured four types of supramolecular network controlled by non‐covalent interactions, such as π???π‐stacking, C? H???π, hydrogen‐bonding, and halogen‐related interactions. Investigation of their photoluminescence properties exhibited disparate emission wavelengths, lifetimes, and quantum yields in the solid state.     

Counter‐anion role in the formation of two supramolecular complexes: [Ag2(DPP)2](ClO4)2·CH3CN and [Ag2(DPP)2(NO3)2] {DPP is N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine}

The title compounds, bis{μ‐N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine‐κ²N¹:P}disilver bis(perchlorate) acetonitrile monosolvate, [Ag₂(C₁₈H₁₇N₂P)₂](ClO₄)₂·CH₃CN, (1), and bis{μ‐N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine‐κ²N¹:P}bis[(nitrato‐κ²O,O)silver], [Ag₂(C₁₈H₁₇N₂P)₂(NO₃)₂], (2), each contain disilver macrocyclic [Ag₂(C₁₈H₁₇N₂P)₂]²⁺ cations lying about inversion centres. The cations are constructed by two N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine (DPP) ligands linking two Ag⁺ cations in a head‐to‐tail fashion. In (1), the unique Ag⁺ cation has a near‐linear coordination geometry consisting of one pyridine N atom and one P atom from two different DPP ligands. Two ClO₄⁻ anions doubly bridge two metallomacrocycles through Ag...O and N—H...O weak interactions to form a chain extending in the c direction. The half‐occupancy acetonitrile molecule lies with its methyl C atom on a twofold axis and makes a weak N...Ag contact. In (2), there are two independent [Ag(C₁₈H₁₇N₂P)]⁺ cations. The nitrate anions weakly chelate to each Ag⁺ cation, leading to each Ag⁺ cation having a distorted tetrahedral coordination geometry consisting of one pyridine N atom and one P atom from two different DPP ligands, and two chelating nitrate O atoms. Each dinuclear [Ag₂(C₁₈H₁₇N₂P)₂(NO₃)₂] molecule acts as a four‐node to bridge four adjacent equivalent molecules through N—H...O interactions, forming a two‐dimensional sheet parallel to the bc plane. Each sheet contains dinuclear molecules involving just Ag1 or Ag2 and these two types of sheet are stacked in an alternating fashion. The sheets containing Ag1 all lie near x = , , etc, while those containing Ag2 all lie near x = 0, 1, 2 etc. Thus, the two independent sheets are arranged in an alternating sequence at x = 0, , 1, etc. These two different supramolecular structures result from the different geometric conformations of the templating anions which direct the self‐assembly of the cations and anions.     

Self‐Regulation in Flow‐Induced Structure Formation of Polypropylene

Flow‐induced structure formation is investigated with in situ wide‐angle X‐ray diffraction with high acquisition rate (30 Hz) using isotactic polypropylene in a piston‐driven slit flow with high wall shear rates (up to ≈900 s⁻¹). We focus on crystallization within the shear layers that form in the high shear rate regions near the walls. Remarkably, the kinetics of the crystallization process show no dependence on either flow rate or flow time; the crystallization progresses identically regardless. Stronger or longer flows only increase the thickness of the layers. A conceptual model is proposed to explain the phenomenon. Above a certain threshold, the number of shish‐kebabs formed affects the rheology such that further structure formation is halted. The critical amount is reached already within 0.1 s under the current flow conditions. The change in rheology is hypothesized to be a consequence of the “hairy” nature of shish. Our results have large implications for process modelling, since they suggest that for injection molding type flows, crystallization kinetics can be considered independent of deformation history.

     

Transformations of iodine species inside elliptical channels of AlPO4‐11 crystals at low temperature: a Raman study

Raman spectra of iodine species confined in one‐dimensional elliptical channels of AlPO₄‐11 (AEL) crystals have been studied from room temperature down to −196 °C. As temperature decreases, thermal fluctuations of individual iodine molecules confined in AEL channels are slowed down and they prefer to rotate to channel axis direction, which increases the population of iodine molecules along channel axis (i.e., lying molecules and chains). Such temperature‐driven orientation transformation of iodine molecules is found to be reversible upon heating up to room temperature. The experimental observations are in good agreement with our theoretical simulations by molecular dynamics on low density iodine‐filled AEL crystals. We thus provide a new way to modulate the orientation of iodine molecules in nanochannels, which may have implications in low‐temperature‐sensitive nanoscale devices. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation and properties of ZnMoO4 anode materials with polymer network gel method

Polymer network gel method combines the advantages of solid-phase method and liquid phase method, triggering acrylamide (AM) radical polymerization in aqueous solution and N, N′- methylene bis acrylamide (MBAM) active double bond cross-linking reaction, forming polymer chains to form a three-dimensional network. The polymer network space formed by the gel is bound and evenly distributed to the ions in the solution, thereby reducing the contact and aggregation of molecules and achieving the purpose of uniform particle size and small particle size. The principle diagram of network gel is shown in Figure. Using cubic zinc acetate and ammonium molybdate tetrahydrate as raw materials, cubic ZnMoO₄ negative electrode materials were prepared with polymer network gel method. The polymer network gel method has various effects on the structure, morphology and electrochemical properties of materials. Besides, the calcination temperature and calcination time were also the key factors to the electrochemical properties of the materials. In this paper, the effects of the ratio of monomer and crosslinker, calcination temperature and calcination time on ZnMoO₄ materials were studied by single variable method, the preparation process was optimized, and its characterization and electrochemical tests were carried out. After 100 cycles, the optimized ZnMoO₄ electrode has a discharge capacity of 374.0 mAh· g^?1, 332.5, 263.5 and 177.1 mAh · g^?1 at current densities of 0.1, 0.5, 1.0 and 2.0 A g^?1, respectively. The electrochemical results show that the optimized ZnMoO₄ has high capacity, large rate capability and excellent cycle stability.